IEC is offering ATTP range of Transdurised Pulse Tool which can be used for regular production in conjunction with Accura Pro i controller in a closed loop circuit.

Magneto Elastic Torque Sensing:
Magneto - Elastic Technology is based on torque-induced changes in the magnetisation in load bearing elements of a rotating shaft. A circumferentially magnetised element integrated with the shaft shares the torsional load and creates an external magnetic field proportional to the applied torque. This external field can be remotely sensed by a variety of magnetometers.

Magneto-Elastic non - contacting torque sensing technology is reliable, features simple construction, and is accurate over all speed range, including zero.

ATTP-4

M5

7500

15

9

9.50

1.32

216

1/4"

9.5

6.0

ATTP-4

M5

8000

15

9

9.50

1.22

249

1/4"

9.5

6.0

ATTP-8M

M8

7000

35

15

9.50

1.68

272

1/4"

9.5

6.0

ATTP-8

M8-M10

6000

35

15

9.50

1.68

272

1/4"

9.5

6.0

ATTS-8

M8-M10

6500

70

35

9.50

1.81

305

1/4"

9.5

6.0

IEC is offering a range of Inline Transducers for Third Party Quality Audits
ART 10 Rotatry Transducer - 1/4" HEX - Designed for use with screw drivers and small pulse tools, the ART 10 is rated for torques ranging from 1-10 Nm or 8-88 In/lbs.

ART 75 Rotatry Transducer - 3/8" - Fitted with 3/8" square drives, the ART 75 is well suited for all torques from 8-75 Nm. with an extended male shaft suited for use with ergo-drive as well as common 3/8" drive sockets, the ART 75 works with pulse tools and other high speed power tools.

Accurate measurement and torque control is essential to ensure that product quality, safety
and reliability is not compromised. The failure of the fastener that is not properly tightened
can lead to catastrophic failures. Fasteners that are insufficiently torqued can vibrate loose
while excessive torque can strip threaded fasteners.

Using a quality torque analyser has become increasingly important for many companies to
ensure that proper torque is being applied and provides gauge requirements associated with the ISO 9002 Quality Standard.

The ATM-229P allows operators to easily adjust the power tool and quality inspectors to monitor and record in process tool performance on the assembly line. This will insure that failures associated with under or over torque fasteners do not occur.

The ACCURA Pro-i controller by IEC has been developed to address the industry need for a controller that provides traceable torque validation (date and time stamped), is easy to program and is available with common network-ready hardware using industry standard protocols.

The ACCURA Pro-i provides precise torque control as well as multiple parameter set capability and "poka-yoke" error proofing to standard Pulse and Impact tools.

Compact in design, the ACCURA Pro-i provides operator feedback via a large digital display and tri-color LED's for fastener Counting, Parameter set Identification and point condition status.
There are OK NOK indicators for finished cycle or batch evaluation and an audible (108 db) alarm for out-of-spec conditions. With eight parameter sets allowing different counts and application set-ups, one tool can be set to perform various applications using its full torque range saving time and installation costs. One or more tools can be attached to a single controller to cover a broad torque range or for repair station applications.

Automatically learns your assembly's fastener installation
characteristics.

The Accura-i Torque controller is easy to set up. Fastener
characteristics are learned, not programmed.

Monitors the fastening event by comparing learned
characteristics to those experienced during fastener installation.

The Accura-i Torque controller finds variations of any type
including those from work piece, fastener or assembly tool.

Monitors the entire assembly process including the number of
fasteners installed.

Ensures that the process is correct for each and every
fastener.

Error proof

Errors identified as they happen. You have a choice of Error-
Proofing methods such as stopping the assembly at the work
bench or tagging it for later re-work.

Torque flexibility

One drive /Accura-i Torque Controller combination can
deliver up to 8 torques

Affordability

Less investment on equipment. Other systems can cost up to
four times as much.

Power Source Universal 100 – 240 VAC, 50 – 60 Hz

Dimensions 8" (w) X 12" (h) X 6" (d)

Pneumatic Source min 50 scfm @ 6 bar pressure (87 psi)

Interface : Two Line O.44" LCD backlit (16) Character per line Four Button keypad (Up, Down, Menu & Reset/ Reverse) Sixteen (16) bi-color LED Fastener

Inputs / Outputs Upto isolated and relay dry contacts; up to 48vdc/120 vac/10 amps with screw lug terminals

Error Proofing : OK/NOK for acceptable cycles vs Rehit / Cross Thread, Strip / Slip Off, Cycle Abort & Batch Count Status

Counting : Status Indicators Eight (8) LED Parameter / Application Set Indicators Batch Status OK / NOK Lights

Serial Port : RS 232 port; standard DB connector (date/ Time/Pset#/TgTq/TQ/COUNT/OK - NOK)

Operating Conditions : Humidity 0-95 % Non condensing Temperature 0 to +50OC

Weight : 5 Kg Approx.